Logic x pro user guide free.Please wait while your request is being verified…

I actually like this better, to be honest. Although it would be nice go have some control of the file start and end points – now I assume with share you’ll bounce anything between the project start- and end marker?

OK, I think everybody using “share to iTunes” should read this carefully , because you will not immediately spot in the Share dialog if cycle mode is still on When you share a project to iTunes, the entire project, from the beginning to the end of the last region, is exported. Any silence at the beginning or end of the project is trimmed. I feel it should also show locators like in ‘normal’ bouncing.

But if I use U. Select the command, click the Learn by Key Label button turns blue , hit T. Hit Learn by Key Label button again, close window, done. You can post now and register later. If you have an account, sign in now to post with your account. Paste as plain text instead.

Only 75 emoji are allowed. Display as a link instead. Clear editor. Upload or insert images from URL. By joshj , 7 hours ago in Logic Pro. By sjasz , 1 hour ago in Logic Pro. Click here! Logic Pro Share More sharing options Followers 0. Reply to this topic Start new topic. Recommended Posts. David Nahmani Posted July 22, Posted July 22, Audio Track Editor: Edit audio regions non-destructively in a close-up view of a single track, including making Flex Time and Flex Pitch edits.

Mixing New Mixer options: The redesigned Mixer now includes gain reduction meters. The new multi-functional Effect slot design simplifies choosing, opening, and bypassing plug-ins. See Overview of mixing in Logic Pro for information about using the Mixer.

Instruments and effects Drum Kit Designer plug-in: Customize or build drum kits to use with Drummer, or to play and sequence drum tracks manually. You can choose multiple drums, then adjust individual parameters for each drum. Use other MIDI plug-ins to perform a variety of real-time operations. See Overview of plug-ins in Logic Pro. For more information, see the relevant sections of the Logic Pro Instruments manual.

Retro Synth: Retro Synth is a flexible, easy-to-use voice synthesizer that can produce a wide variety of sounds. This instrument plug-in provides four synthesizer types— Analog, FM, Sync, and Wavetable—each of which can generate unique sounds. Bass Amp Designer: This effect plug-in emulates the sound of famous bass guitar amplifiers and the speaker cabinets used with them.

This chapter introduces the main working areas of Logic Pro, and presents some basic tasks to help you start working in the app.

Logic Pro is a full-featured music and audio app you can use for every aspect of music creation: recording, arranging, mixing, and more—everything from sketching your initial ideas to producing polished final mixes. You can use Logic Pro for any type of project, from simply recording yourself singing or playing all the way to complex multi-track, multi- section compositions.

For a quick tour of the Logic Pro interface, see Get started with the Logic Pro main window, then choose topics from the list on the left that introduce specific features and working areas, with basic tasks to help you get started.

The first time you open Logic Pro, it downloads basic content, including software instrument presets and Apple Loops, that you can use in your projects. After the download is complete, the Project Chooser opens so you can create a new project or open an existing one. To learn more about creating and opening projects, see Get started with Logic Pro projects.

To hide the Dock, Control-click the area in the Dock between the last app icon and the Downloads icon, then choose Turn Hiding On from the shortcut menu. You can access all of the major working areas of Logic Pro in the main window. The central part of the main window is the Tracks area.

You record and arrange the musical material in your project on the tracks in the Tracks area. There are several different track types, including audio, software instrument, and Drummer tracks. When you make a recording, or add an Apple Loop or other media file, it appears as a rectangular region on the selected track. Across the top of the main window is the control bar, which includes buttons that let you access different parts of Logic Pro, transport controls for controlling project playback, a Master Volume slider to adjust the overall project volume, and other controls.

In the center of the control bar is the LCD, where you can view the current playhead position, move the playhead, and set the project tempo, key, and time signature. To start working with audio tracks, see Get started with Logic Pro audio tracks.

To start working with software instrument tracks, see Get started with Logic Pro software instrument tracks. To start working with your recordings and other material in the Tracks area, see Get started arranging regions in Logic Pro. A patch contains the instrument, effects, and routing settings that control the sound of a track.

When you choose a patch, those settings are applied to the currently selected track. The Library shows available patches for the selected track. You can choose a category on the left to see available patches or subcategories on the right. In addition to patches, you can view and select plug-in presets and other settings in the Library, when the corresponding item is selected. For information about choosing patches and other items in the Library, see Logic Pro patches overview.

The available inspectors and parameters change, depending on which working area has focus, and what is selected. The channel strips for the selected track and its output appear in the lower part of the inspector, so you can view and quickly edit channel strip parameters and plug-ins. The Quick Help area at the top of the inspector shows a brief description of whatever part of the Logic Pro interface you move the pointer over.

Some Quick Help descriptions contain links to more detailed information. For information about editing region and track parameters, see Logic Pro Region inspector and Edit Logic Pro track parameters. When you open the Smart Controls pane, you see the screen controls for the the selected track. Screen controls can control both channel strip and plug-in parameters, including software instruments and effects.

Move the knobs and other screen controls, and hear how sound changes. For more information, see Logic Pro Smart Controls overview. The Mixer shows the channel strips for every track in your project, including auxiliary and output channel strips, and the master channel strip.

This makes it easy to see and adjust relative levels and other track settings. You can adjust the level and pan position of each channel strip, insert instrument and effect plug-ins and edit their parameters, mute and solo tracks, and send the output to auxiliary or output channel strips.

To start working in the Mixer, see Get started with mixing Logic Pro projects. For more information, see Overview of mixing in Logic Pro. The available editors depend on the type of track or region selected.

In the Audio Track Editor, you can copy, paste, move, trim, split, and join audio regions. You can also quantize and edit the timing and pitch of audio material using Flex Time and Flex Pitch.

You can add and edit notes and other musical symbols. You browse or search for loops in the Loop Browser, where you can preview them to choose the ones you want to use. For more information, see Apple Loops in Logic Pro. For more information about working with media files, see Using loops and other media in Logic Pro. When Show Advanced Tools is selected in the Advanced preferences pane, additional features, browsers, and editors are available. A project is the document that contains all of your recordings, the media files you add, and all the edits you make.

You start working in Logic Pro by creating a project or opening an existing one. You can create new projects and open existing projects. Logic Pro includes templates and demo projects that you can use to try out the tasks presented in the following Get Started topics.

Logic Pro also includes several tutorial projects that you can use to learn about features of the app by following steps in a hands-on setting. In the Project Chooser, click Project Templates on the left, then double-click a template on the right.

You can also create your own templates and choose them in the Project Chooser. Open an existing project 1. Open a tutorial project 1. In the Project Chooser, click Tutorials on the left, then double-click a tutorial project on the right. In the Project Chooser, click Demo Projects on the left, then double-click a demo project on the right.

For more information about working with projects, see Logic Pro projects overview. For information about creating projects, see Create Logic Pro projects. Get started with project playback in Logic Pro You can play back the project at any time to hear your latest changes.

You control playback and navigate the project using the playhead, the ruler, and the transport buttons, located in the control bar. The playhead extends from the top to the bottom of the Tracks area, and moves as the project plays, showing the currently playing point in the project. At the top of the playhead is a triangle that you can drag to move the playhead to a different time position, or scrub the project by moving the playhead across the Tracks area to quickly locate a particular musical passage.

At the top of the Tracks area, the ruler shows units of time in bars, beats, and beat divisions depending on the zoom level. The control bar contains a group of buttons called transport buttons that you can use to control playback, move the playhead, and start recording. The transport buttons include the following:. The cycle area can be used for composing, practicing a part before recording, recording multiple takes, and other purposes.

When you turn on the cycle area, it appears as a yellow strip in the upper part of the ruler. Start and stop playback In Logic Pro:. When the project is playing, the Go to Beginning button becomes a Stop button. Double-click again to stop playback. Move the playhead In Logic Pro, do any of the following:. If the project is playing, playback continues from the clicked position.

Each time you click Rewind, the playhead jumps back to the previous bar. Each time you click Forward, the playhead jumps forward to the next bar. In Logic Pro, click the Cycle button in the control bar or press C to activate the cycle area. Hold the pointer over either the left or right edge of the cycle area, then drag to resize it.

For iPad users, a separate app is available that you can use to navigate Logic Pro projects, and perform mixing, editing, and other functions, on your iPad. The Logic Remote app is available on the App Store. For more information about playback and navigation, see Play a Logic Pro project and Control playback in Logic Pro with the transport buttons. For information about using the cycle area, see Use the cycle area in Logic Pro.

Get started with Logic Pro project properties Each project has a set of properties, including tempo, key, and time signature. The project tempo, key, and time signature are displayed in the LCD in the center of the control bar, along with the current playhead position. Changing the tempo can affect the playback speed of audio and software instrument recordings, Drummer regions, and Apple Loops, in the project.

Key The project key defines the central note called the tonic , and whether the project uses the major or minor scale. Time signature The project time signature defines how musical time is divided into measures and beats. The first number controls the number of beats in each bar, and the second number controls the beat value the note that counts as one beat.

Changing the time signature does not affect playback, but does affect the units displayed in the ruler and the bars in the Score Editor. For more information about working with project properties, see Logic Pro project properties overview.

When Show Advanced Tools is selected in the Advanced preferences pane, you can add tempo, key, and time signature changes in a project. The recording appears as an audio region on the selected audio track, showing an audio waveform. You can arrange and edit audio regions in the Tracks area, and edit them in a close-up view in the Audio Track Editor. When you add a track, you can choose a patch for the track in the Library.

You can quickly audition patches to find the one you want to use, and change the effects for an audio track by choosing a different patch. Each audio patch contains one or more audio effects, and can include sends and other routing settings.

Logic Pro includes a metronome, which plays a steady beat to help you play in time while recording. You can have the metronome play as you record, or only play a one-bar count-in before recording starts. Add an audio track 1. In the Logic Pro toolbar, click the Add Tracks button. Click one of the two Audio icons at the top of the New Tracks dialog. If necessary, click the Details triangle to open the bottom of the dialog.

Choose the audio device and input channel or stereo pair from the Input pop-up menu on the left. In the Logic Pro Library, click a category on the left. You can audition audio patches by clicking them, then playing your instrument, singing, or making sound, to find the one you want to use. For more information about choosing patches, see Logic Pro patches overview. Prepare for audio recording Before you start recording audio in Logic Pro, do the following:.

Record on an audio track 1. In the Logic Pro track list, select the header of the audio track you want to record on. Click the Record button in the control bar or press R to start recording. After a one-bar count-in, recording starts. The recording appears as a new audio region on the track as you record. Click the Stop button in the control bar or press the Space bar to stop recording.

For more information about recording on an audio track, see Overview of recording in Logic Pro and Record sound from a microphone or instrument in Logic Pro. For information about connecting microphones and other audio devices, see Using audio devices with Logic Pro overview. Logic Pro features a complete library of professional-quality software instruments, including synthesizers and other keyboards, guitars, drums, world instruments, and more.

A patch contains the instrument, effects, and routing settings that control the sound of the track. You can change the sound of a software instrument track by choosing a different patch from the Library. In the Library, you can also audition patches to find the one you want to use. You record a software instrument on a software instrument track in the Tracks area. The recording appears as a MIDI region on the selected software instrument track.

You can have the metronome play as you record, or play only a one-bar count-in before recording starts. If your music keyboard has other controls, such as faders, knobs, or drum pads, try using them as well. The new track appears in the Tracks area, and the Library opens on the left. You can audition software instrument patches by clicking them in the Library, then playing your music keyboard, to find the one you want to use. Record a software instrument 1. Select the software instrument track you want to record to.

The recording appears as a new software instrument region on the track as you record. For more information about recording software instruments, see Overview of recording in Logic Pro and Record software instruments in Logic Pro.

Audio tracks also feature an Input Monitoring button. The track headers are located along the left side of the Tracks area, so you can easily see the mute, solo, and other settings for all tracks while working. The Solo button turns yellow, and the Mute buttons of all unsoloed tracks flash blue. Click the button a second time to restore the track to its previous state. Option-click the slider to return it to a neutral level 0 dB gain.

The dot on the wheel indicates the current position. The corresponding buttons on all the swiped tracks switch to the same state. For more information about working with tracks, see Logic Pro Tracks overview. For information about using the track controls, see Logic Pro track header overview.

You choose a patch in the Library, which applies those settings to the selected track. You can try out different sounds for the track by choosing a different patches, as long as the patch is compatible with the track type.

Patches can include one or more channel strip settings, and can also contain routing information auxes and metadata for Smart Controls and controller mapping. Patches for audio tracks can include default effects settings. Patches for software instrument tracks include an instrument plug-in as well as effects settings.

The patches displayed in the Library depend on the track type. For example, when an audio, software instrument, or Drummer track is selected, patches for that track type are available. Choose a patch for the selected track 1.

In Logic Pro, click the Library button in the control bar or double-click the track header to open the Library. Choose a patch category from the list on the left, then choose a patch from the list on the right.

You can quickly move through the patches in the list using the Up and Down Arrow keys. You can search for patches by name in the Library, edit patches by changing channel strip settings, adding plug-ins, or editing plug-in parameters, and save your own custom patches. Get started arranging regions in Logic Pro The Tracks area is where you arrange the recordings, Apple Loops, and other musical material in your project, organizing them into sections such as intro, verse, and chorus to build an arrangement.

The Tracks area shows a visual representation of time moving from left to right. You build a project by arranging regions in rows called tracks, that run horizontally across the Tracks area.

Regions appear as rounded rectangles in the Tracks area. There are several different types of regions, depending on the track type.

The two primary region types are audio regions, which show the audio waveform, and MIDI regions, which show note events as thin rectangles. You can arrange regions in a variety of ways in the Tracks area, by moving, looping, resizing, splitting, joining, and deleting them.

Try following the tasks below, using regions in the project. Move a region In Logic Pro, do any of the following:. Resize a region 1.

In the Logic Pro Tracks area, move the pointer over the lower-right edge of a region. Drag the edge of the region horizontally to shorten or lengthen it. In the Logic Pro Tracks area, place the pointer over the upper-right edge of the region. When you drag the edge of the region out by its full length, rounded corners indicate the beginning and end of each complete repetition of the region. Split a region using the playhead 1. In the Logic Pro Tracks area, select the region you want to split.

Only the selected region is split, even if an unselected region on another track is under the playhead as well. If multiple regions are selected and are under the playhead, they are all split. Split a region using the Scissors tool 1. When selecting a cut point with the Scissors tool, you can move backward and forward in steps of one division. The grid is based on the Snap pop-up menu setting.

For information about using Snap, see Snap items to the grid in Logic Pro. For more information about arranging a project, see Logic Pro Arranging overview. For information about working in the tracks area, see Logic Pro Tracks area overview.

A keyboard graphic along the left edge of the Piano Roll Editor provides an easy guide to the pitches of notes. On the left are controls for quantizing the timing and pitch of MIDI notes, and editing their velocity.

The header shows the name of the selected region, or the number of regions if more than one is selected , as well as the pitch and position of the pointer in the region. Note: You can change the note length as you add a note, by holding down the mouse button and dragging left or right. While you drag, a help tag shows the precise end point and length of the note.

Tip: It might sometimes be difficult to grab the corner of very short notes. You can use the Finger tool, which allows you to grab notes anywhere to alter their length, or zoom in for a closer view. The color of the note event changes and the horizontal line inside the event either lengthens or shortens.

Get started with the Logic Pro Audio Track Editor The Audio Track Editor shows a close-up view of part of an audio track in the Tracks area, displaying the audio waveforms of the regions on the track.

In the Audio Track Editor, you can move, trim, split, and join audio regions, play a region in isolation, and edit regions in other ways. Edits you make in the Audio Track Editor are non- destructive, so you can always return to your original recordings.

You can also quantize and edit the pitch of audio material in the Audio Track Editor using Flex Pitch. When you choose a Flex Pitch algorithm, the contents of the audio track are analyzed for pitch, and the results are displayed as a pitch curve overlaid on the waveform. Along the top of the Audio Track Editor is a ruler showing time divisions, based on the time format chosen in the LCD, and a menu bar with local menus. The main area of the Audio Track Editor shows the audio waveform of the regions in the selected audio track.

Trim an audio region 1. In the Logic Pro Audio Track Editor, place the pointer over the lower-left or lower-right edge of the region. Drag the pointer to trim the beginning or end of the region. You can scrub regions to find the point where you want to cut by dragging across the regions with the Scissors tool. Before moving or deleting a segment of a split audio region, click to select it. Join regions 1. Select the split regions.

Turn on flex in the Audio Track Editor 1. Open the Audio Track Editor by doing one of the following:. Change the pitch of a note 1. When Show Advanced Tools is selected in the Advanced preferences pane, you can also edit the timing of individual notes, chords, or sounds in the Audio Track Editor using Flex Time. You can also open the Audio File Editor to make permanent destructive edits to the source audio file for a region. You can choose from different genres, and choose different drummers in each genre.

Each drummer has a specific drum kit and playing style. You can choose a drummer preset, edit drum settings to adjust the playing style, exchange drum kits, and choose individual drum sounds. To work with Drummer, you add a Drummer track to the project. A Drummer track is similar to a software instrument track, but it contains only Drummer regions, rather than MIDI regions. Both track and region parameters can be edited in the Drummer Editor.

In the Logic Pro toolbar, lick the Add Tracks button. Click the Drummer icon the drum kit at the top of the New Tracks dialog. A Drummer track is added, along with one 8-bar region. The Library opens, and a default patch is loaded to the track. Choose a genre and drummer 1. In the Logic Pro Library, click a genre.

The available drummers for the selected genre appear to the right of the genres. A preset consists of a number of region settings, visible to the right of the presets area.

The farther right you place the puck, the more complex the sound becomes; the higher you place the puck, the louder the sound plays. Choose a pattern variation for a drum or percussion instrument In the Logic Pro Drummer Editor, do any of the following:. Exchange a drum 1. The Exchange panel opens to the left if exchange pieces are available for that kit piece. Click the Info button of a selected kit piece to view its description.

Click the kit piece that you want to exchange in the Exchange panel. You may need to scroll in order to find the one you want to use. The piece is exchanged and the respective drum sound is loaded. Click anywhere in the plug-in window background to close the panels. You can click the lock to prevent any changes to the fills setting when switching presets or drummers.

Note: The presence of ghost notes depends on the chosen drummer and the complexity setting. Note: This is relevant only if the Hi-Hat is selected in the drum kit representation. Any changes or selections you make in the Drummer Editor affect only the selected region, not the entire track. Each Smart Control includes a set of screen controls that you can adjust to control the sound of the patch. Smart Controls typically include EQ or tone controls, reverb and other effects controls, and controls specific to the type of track or instrument.

For example, the Smart Control for a synthesizer might include screen controls for choosing the waveform and adjusting the resonance and filter cutoff, while one for a string instrument might include controls for changing the articulation. When you open the Smart Controls pane, you see the screen controls for the selected track. Each screen control is labeled to make its function easy to understand. Each screen control has a text label indicating what aspect of the sound it controls.

You can also change the layout for a Smart Control, save your own Smart Controls, map screen controls to channel strip and plug-in parameters, and assign controllers on your MIDI devices to screen controls. With Live Loops, you can play, arrange, and record new musical ideas in real time. Easily combine and edit MIDI and audio tracks — from vinyl samples to live instruments to multitrack audio stems — with constant or variable tempo.

Quickly manipulate the timing and tempo of your recording with Flex Time. Easily move the individual beats within a waveform to correct drum, vocal, guitar, or any other kind of track without slicing and moving regions. Edit the level and pitch of individual notes quickly and easily with Flex Pitch.

Roll over any note and all parameters are available for tweaking. Control your mix from anywhere in the room with Multi-Touch faders to find the best sound. Use a variety of onscreen instruments, such as keyboards, guitars, and drum pads, to play any software instrument in Logic Pro X from your iPad.

Using Drummer is like hiring a session drummer or collaborating with a highly skilled beat programmer. Create organic-sounding acoustic drum tracks or electronic beats with the intelligent technology of Drummer.

Choose from dozens of drummers who each play in a different musical genre, and direct their performances using simple controls. Logic Pro X turns your Mac into a professional recording studio able to handle even the most demanding projects. Capture your compositions and performances — from tracking a live band to a solo software-instrument session — and flow them into your songs. Leave blank if undecided.

Changes to the bpm or sample rate in your project will generate a Sync button in Satellite Sessions. You are the Host of the session. Any pre-shared audio stems will be visible and audible in your Satellite Sessions plugin.

Press play in Logic to play the stems inside Satellite Sessions.

❿
 
 

❿

Logic x pro user guide free

 
Change the time, tempo, and clock format 1. This chapter introduces the main working areas of Logic Pro, and presents some basic tasks to help you start working in the app. Important: After a project is saved as a Logic Pro X project, it can no longer be opened in earlier versions of Logic Pro. If multiple regions or events are selected, the mute state of the clicked region or event applies to all selected regions or events. This makes it easy to see and adjust relative levels and other track settings. When the Tool menu is open, you can also use the key shown next to a tool to select it. Logic Pro Inspector interface You can view and edit parameters for regions, tracks, and other items in the various inspectors. Customize the Logic Pro control bar The control bar offers a default set of buttons and other controls, providing commonly used options.❿
 
 

Pdf Download | Apple Logic Pro X User Manual ( pages). Logic x pro user guide free

 
 
Option-click the slider to return it to a neutral level 0 dB gain. For information about assigning tools, see Assign tools in Logic Приведенная ссылка. Delete a project 1. Note: This is relevant only if the Hi-Hat is selected in the drum kit representation. You can also select, drag, loop, and alter the length of regions or events using the Pencil tool. The Quick Help area at the logic x pro user guide free of the inspector shows a brief description of whatever part of the Logic Pro interface you move the pointer over. Press the Space bar.

❿